Small vertical injection machine with a turn table
TS-5-AV8-TE
TS-5-AV8-TE is small and space-saving. It has a turning mold base and is fit for inline molding.
Feature
Short cycle inserting for small precise molding
One upper mold attached to the nozzle and two lower molds on 300mm table make operation faster and easier.Compact and layout free
The machine size is small (W760mm x D720mm x H1710mm), and capable for a assembly line.Easy operation
Adjusting valves and switchs are located on operators side. Nozzle touch function makes it easy to purge remained resin in the cylinder.
Specification
| ITEM | UNIT | SPECIFICATION |
|---|---|---|
| Outer diameter of the screw | mm | 16 / 18 |
| Shot volume | cm3 | 9.0 / 11.4 |
| Max injection | mPa | 120 / 95 |
| Injection ratio | cm3/sec | 19.4 / 24.5 |
| Heat control | Digital proportional control 3 units | |
| Heater | kW | 1.31 |
| Nozzle stroke | mm | 40 |
| Nozzle touch | mm | 6 (from upper mold platen) |
| Frame structure | 2 tie bars | |
| Clamping system | Direct pressure system (Lower mold moves up) | |
| Clamping force | kN | 44.5 |
| Mold open stroke | mm | 45 |
| Daylight | mm | 120 |
| Inner space between ti bars | mm | 250 |
| Lowe mold plate | mm | 120W x 80D |
| Tabale diameter | mm | 300 |
| Eject stroke | mm | 25 |
| Eject force | kN | 4.49 |
| Screw position control | Digital setting / display | |
| Hydlaulic motor | kW | 2.2 |
| Total power source | kW 3 phase | AC200V / 50Hz AC220V / 60Hz 3.51 |
| Air consumption | litter/min | 2 (0.5Mpa) |
| Machine weight | kg | 385 |
| Machine size | mm | 760W x 720D x 1,710H |