PTFE Pre-forming machine
Pre-forming machine makes the preformed material by pressing powdered PTFE with special additives. The preformed material is set to the paste extruder which forms the PTFE material to tube, tape or wire covering.
Specification
| Inner Diameter of Molding Barrel | mm | 16 to 150 |
| Barrel stroke | mm | 800 to 2700 |
| Number of barrels | 1 to 3 | |
| Driving System of Pressing | Standard | Verticcal type / Oil-hydraulic drive |
| Heating | Option | Band-heater |
| Material feeding | Standard | Electric feeder |
| Option | Air-vibrator |
Upper Mouth for Supplying Material / Two-head Type Small Pre-forming Machine for PTFE
