Extruder with Screw
Features
| Material of Barrel | Nitriding steel (SACM-645) |
| Material of Screw | Chrome-molybdenum steel (SCM-440) |
| Treatment: Nitriding and hard-chrome plating | |
| Heating / Cooling for Barrel | 1) Band-heater type >> Blower type |
| 2) Aluminum-casting-heater >> Water cooling type | |
| Temperature Control for Barrel | Temperature controller with PID method |
| Screw Drive | Inverter motor |
| Clamping System of Head-die | Clamping with two bolts |
| Simple structure, high touching effect and stability, easy work for exchanging meshes-net | |
| Heating for Head-flange | Internal heater (Cartridge heater) |
| Reduction Gear System | Reduction method by single-helical gear |
| Gear | Hardenng / Polished |
| Circuit Control | By high precise programable controller |
Specifications
| TNE-40 | TNE-65 | TNE-90 | ||
|---|---|---|---|---|
| Outer Diameter of Screw | mm | 40 | 65 | 90 |
| L/D | - | 32 | 42 | 36 |
| Rotating of Screw | rpm | max. 150 | max. 320 | max. 240 |
| Driving System | - | DC Motor / Inverter Motor | ||
| Motor | kW | 15 to 22 | 75 to 90 | 90 to 132 |
| Barrel Heating System | - |
1) Band-heater Type 2) Aluminum-casting-heater Type |
||
| Treatment Quantity * | kg/h | 20 to 40 | 150 to 400 | 350 to 500 |
| Power Source | V | AC200/220 | AC400/440 | |
| Height of Axis | mm | 1000 | 1000 | 1000 |
| Photo | - |  |
||
- Treatment Quantity is a value in case of ABS-plastic.
It is subject to change on some condition of plastics grade and temperature.